CCJC's main products including bonding crystal, YLY-based crystal, YVO4 based crystal, YAG based crystal, LBO, BBO, KTP, Cr:YAG, Cospinel, Ti:sapphire, Er:Glass, YbKGW, YbKYW, TGG, CaF2, MgF2 etc. Currently, CCJC grows several crystal series in housep-LBO and BBO series; YLF based series, YVO4 and YAG based series.
Nd:YLF is characterized by its long lifetime of 4F/3/2 neodymium energy level. Compared to Nd:YAG, the lower thermal conductivity and a weak negative Dn/Dt lead to lower thermal distortions and allow to distortions and allow to achieve a better output beam quality. Another distinctive feature is the high UV transparency, which is favorable for pumping with xenon flash lamps.
1) High power, low beam divergence, effective single mode operation.
2) High average power Q-switching at a moderate repetition rate.
3) Linear polarized resonators for Q-switching and frequency doubling.
4) Stimulated emission cross section is favorable for low CW threshold.
5) 1053nm output of Nd:YLF matches gain curves of Nd:Glass and performs well as an oscillator and pre-amplifier for this host.
*Slabs, thread rod, Er:YAG, Yb:YAG, Cr:YAG, Ce:YAG, Tm:YAG, Ho:YAG and other ion doped YAG crystals are also available upon request.
| Doping(atm%): |
0.1%~2.5% |
| Orientation: |
<111>, <100>, <110> crystalline direction |
| Wavefront Distortion: |
λ/10 per inch @632.8nm |
| Dimension Tolerances: |
rods with diameter: +0.0/ -0.05mm, Length: ±0.1mm |
| Surface Quality: |
10/5 Scratch/ Dig MIL-O-1380A |
| Perpendicularity: |
<5' |
| Parallelism |
<10'' |
| Clear Aperture |
>90% |
| Chamfer |
<0.2×45° |
| Barrel Finish |
50-80 micro-inch(RMS) |
| Size |
Upon customer request |
| Coating:AR, Rflect |
A:350-650nm B:650-1050nm C:1050-1580nm |
| Damage Threshold |
750MW/CM² at 1064nm, TEM00, 10ns, 10Hz |
| Quality Warranty Period |
One year under proper use |
Optical Design
There are eight professors in our scientific research team. All of them come from Chinese Academy of Sciences, Changchun Institute of Precision Machinery and Physics. We can supply design Optical System according to your demand.
Processing & Testing
We have more than50 advanced milling grinding, polishing, plating equipments from The Unite States and Japan. And also introduced the ZYGO horizontal laser interferometer, AK100 horizontal laser interferometer, LAMBDA950 spectrophotometer, the focal length meter and other test equipments.
Optical Coating
We are coat from 0.2um to 20um. Including AR coating, high reflect film, the splitting film, laser crystal film, IR film, UV film and Optical fiber film etc. Especially in the laser, the frequency doubling crystal, IR crystal, and UV band coating we have huge advantage.
Certification
){kind=link}